1. Home | Products & Solutions| Welding Automation Home| Welding Automation| Orbital Welding| Fusion Systems| Cooling Unit - Model 2Y7-CW / M2X7-CW / M2Y7-CW

Cooling Unit - Model 2Y7-CW / M2X7-CW / M2Y7-CW

model-207-cooling-unit_0.jpg
model-207-cooling-unit_0.jpg

Cooling Unit - Model 2Y7-CW / M2X7-CW / M2Y7-CW

AMI is pleased to introduce the M2Y7-CW economical cooling solution to help cool AMI fusion weld heads. The 2Y7-CW is designed to interface with the M217 power supplies. This cooler will provide a coolant fault if the coolant is flowing below a preset minimum flow rate. If the power supply is configured to monitor the cooler, then a fault will appear on the power supply and the weld will go thru sequence stop to prevent potential damage to the weld head.

The 2Y7-CW plugs directly into the M217 for power. As a result, M217 and M2Y7-CW are stackable to keep the power and interface cables within reach and to save valuable bench space.

Note the M217P has it’s own version of water cooler that is also designed to be stackable with the M217P.

Cooling Unit - Model 2Y7-CW / M2X7-CW / M2Y7-CW

Where To Buy Request Information
  • Interfaces to M217 power supply
  • Independent / Stand-alone operation is possible
  • Sensing for coolant flow
  • Recommended use with De-ionized water w/Ethylene
  • Glycol mixture
  • Stackable design
  • Built-in Circuit Breaker protection
  • Service Cable & Ethernet extensions to allow the weld head to work further away from the Power Supply and Water cooler

Specifications

Ordering

Documents

Additional Documents

otherdocuments_icon

Need Product Help?

Product information and support line:

1.800.ESAB.123

Caret Down