1. Inicio | Productos y soluciones| Equipos de oxi- gas Inicio| Equipos de oxi- gas| Reguladores| SR 310 Series Flow Meter

SR 310 Series Flow Meter

0781-0354_SR312-320_Flowmeter_lo.jpg
0781-0354_SR312-320_Flowmeter_lo.jpg
0781-0353
0781-0354
0781-0355

SR 310 Series Flow Meter

The SR311-320 CO2 Flowmeter adjustable pressure gauge is specifically designed for use with standard (non-siphoned) carbon dioxide cylinders. Our unique design incorporates aluminum heat sink fins which permit high flow rates without freeze-up.

Dónde comprar Consulta sobre este producto
  • Designed for CO2 application (non-siphoned tube cylinders)
  • High flow CO2 applications (SR 310 100 PSIG) (SR 311/312 100 SCFH) with adequate supply or source
  • Designed for core wire applications
  • Machined aluminum body & housing cap
  • 2" (50.8 mm) gauge
  • Stem type seat mechanism
  • 1.75" (44.5 mm) diaphragm - fabric reinforced neoprene
  • Self reseating relief valve (not designed to protect downstream equipment)
  • Sintered inlet filter - bronze
A regulator equipped with a flow gauge is not accurate when a back pressure in excess of 2 PSIG exists at the outlet. Back pressure is caused by a restriction in the equipment downstream of the flow gauge. Metering valves, kinked hoses or even very long hoses are restrictions that can cause back pressure. In applications where back pressure in excess of 2 PSIG can be expected, a regulator equipped with a flow meter should be used. WARNING: High gas withdrawal rates may cause regulator freeze up and will require cylinder manifolding. Consult your gas supplier
  • Fabricación industrial en general
  • Reparación y Mantenimiento
  • Fabricaión de aceros estructurales
  • Fabricación liviana

Especificaciones

Pedidos

Documentos

Documentación adicional

otherdocuments_icon

¿Necesita ayuda con el producto?

Información de Producto y soporte en linea:

(81) 8305-3700

Caret Down